Skip to content
Quelle Occasion
Menu

Photo: DeFacto, CC BY-SA 4.0, via Wikimedia Commons

Jaguar XE I faults

1 fault documented by at least two sources, listed by version then by mileage at onset when known.

Good choice, check first
Reliability
4.0/5

1 known fault

2.0D 163 ch

  1. Timing chain of the 2.0 Ingenium diesel

    Severity 3/3 · Serious

    The 2.0 Ingenium diesel in the XE is described by several specialist sources and forums as prone to timing chain wear: a metallic noise on cold start, camshaft fault codes, and a chain located at the rear of the engine that requires removing the gearbox to reach it. The sources mention a chain service at the end of 2019 (forum); check whether the chain has already been replaced.

    Versions
    2.0D 163 ch, 2.0D 180 ch
    Onset
    not documented
    Repair
    not documented

2.0D 180 ch

  1. Timing chain of the 2.0 Ingenium diesel

    Severity 3/3 · Serious

    The 2.0 Ingenium diesel in the XE is described by several specialist sources and forums as prone to timing chain wear: a metallic noise on cold start, camshaft fault codes, and a chain located at the rear of the engine that requires removing the gearbox to reach it. The sources mention a chain service at the end of 2019 (forum); check whether the chain has already been replaced.

    Versions
    2.0D 163 ch, 2.0D 180 ch
    Onset
    not documented
    Repair
    not documented

No recurring fault documented for: 2.0 essence 200 ch, 2.0 essence 250 ch.

Price and diagnose repairs

Read fault codes

An OBD scanner plugged in under the steering wheel shows stored fault codes, even with warning lights off: useful during the test drive.

Parts and maintenance

Compare prices of parts for the Jaguar XE I (timing, brakes, filters) to estimate the repairs to plan for.

← Back to the Jaguar XE I guide